STMBL servo driver - open source projekt z DE

Odpovědět
lubos
Sponzor fora
Příspěvky: 5088
Registrován: 2. 5. 2007, 3:47
Bydliště: Praha

21. 2. 2016, 9:03

Já tak nějak čekám jak bude verze tištáku 3.4 pak do toho asi půjdu ale co jsem koukal naposledy tak tam ještě nebyla.
XpertMill, Gravos, Ninos, Galaad
IQ156
-1500Kč, -520Kč, -1čokoláda, - 28000Kč
www.freeair.cz www.rotexelectric.eu www.retrofitcnc.cz
bronek999
Příspěvky: 521
Registrován: 6. 3. 2014, 6:50

22. 2. 2016, 9:38

verzia 3.4 je v adresari kicad. Eagle do buducna moc nechcu podporovat?
Verzia 3.4 bude pravdepodobne coskoro premenovana na 4.0
Uživatelský avatar
Thomeeque
Příspěvky: 8867
Registrován: 30. 1. 2012, 10:20
Bydliště: Mimo ČR

22. 2. 2016, 9:44

bronek999 píše:verzia 3.4 je v adresari kicad.
Akorát je to jednořádkový dummy soubor.
mimooborová naplavenina • kolowratský zázrak™ • NPS • GCU • HirthCalc • ncDP.ino
lubos
Sponzor fora
Příspěvky: 5088
Registrován: 2. 5. 2007, 3:47
Bydliště: Praha

22. 2. 2016, 9:57

Aho
kicad mám nainstalovaný aprávě proto vím žetam ten tišták neni.
XpertMill, Gravos, Ninos, Galaad
IQ156
-1500Kč, -520Kč, -1čokoláda, - 28000Kč
www.freeair.cz www.rotexelectric.eu www.retrofitcnc.cz
crinq
Příspěvky: 12
Registrován: 29. 10. 2015, 2:00

22. 2. 2016, 2:35

Hi,
i'm a bit busy with my day job right now.
The schematic will get some changes in the power supply section soon.
There is a mockup of the pcb in the git: https://github.com/rene-dev/stmbl/blob/ ... stmbl.scad" onclick="window.open(this.href);return false; (see lines 340 - 357 for single modules)

Nico
crinq
Příspěvky: 12
Registrován: 29. 10. 2015, 2:00

22. 1. 2017, 5:45

Hi,
the STMBL 4.0 prototype is working:
https://www.youtube.com/watch?v=DIg71IrnDLM" onclick="window.open(this.href);return false;
https://www.youtube.com/watch?v=-E1o_5cFyto" onclick="window.open(this.href);return false;

Schematic:
https://github.com/rene-dev/stmbl/blob/ ... bl_4.0.pdf" onclick="window.open(this.href);return false;

PCB:
https://github.com/rene-dev/stmbl/blob/ ... .kicad_pcb" onclick="window.open(this.href);return false;
https://seafile.ist-wunderbar.com/f/967462b001/" onclick="window.open(this.href);return false;
https://seafile.ist-wunderbar.com/f/049651b717/" onclick="window.open(this.href);return false;

3D Model:
https://github.com/rene-dev/stmbl/blob/ ... stmbl.scad" onclick="window.open(this.href);return false;
https://www.dropbox.com/s/mds3rerb9qzyc ... 8.png?dl=0" onclick="window.open(this.href);return false;

Code:
https://github.com/rene-dev/stmbl/tree/newstuff-v4" onclick="window.open(this.href);return false;

V3.3 driving a Manutec R15:
https://www.youtube.com/watch?v=KfJ4x4bL54U" onclick="window.open(this.href);return false;

STMBL 3.3 stack for the Manutec:
https://www.dropbox.com/s/35u2tpufer0ug ... 4.JPG?dl=0" onclick="window.open(this.href);return false;

Nico
lubos
Sponzor fora
Příspěvky: 5088
Registrován: 2. 5. 2007, 3:47
Bydliště: Praha

31. 1. 2017, 8:12

Tak co , kdo do toho půjde?
Já bych si jeden na testování rád sestavil.
XpertMill, Gravos, Ninos, Galaad
IQ156
-1500Kč, -520Kč, -1čokoláda, - 28000Kč
www.freeair.cz www.rotexelectric.eu www.retrofitcnc.cz
Uživatelský avatar
robokop
Site Admin
Příspěvky: 22371
Registrován: 10. 7. 2006, 12:12
Bydliště: Praha
Kontaktovat uživatele:

31. 1. 2017, 9:35

taky bych se pridal na test
Vsechna prava na chyby vyhrazena (E)
crinq
Příspěvky: 12
Registrován: 29. 10. 2015, 2:00

1. 2. 2017, 10:31

Hi,
we will assemble a batch after testing.

Nico
K_73
Příspěvky: 267
Registrován: 10. 4. 2014, 5:43
Bydliště: Praha

1. 2. 2017, 11:36

Hi Nico, it sounds good. Do you have some idea about the price per unit?
crinq
Příspěvky: 12
Registrován: 29. 10. 2015, 2:00

1. 2. 2017, 12:53

Hi,
i think we can do <10€ for a blank pcb, <170€ for smt assembled pcb (tested) and +50€ for the tht parts + heatsink (not assembled).
But we have to check the BOM and see how much rework and testing is needed.

There are two bugs in 4.0 that are fixed on Github but untested.
If you want to build your own please wait for 4.1.

Nico
misil
Příspěvky: 150
Registrován: 25. 2. 2014, 11:00

1. 2. 2017, 3:28

zajimave, nejaka serva bez driveru bych doma nasel.

Ale tech 170Ecek uz je docela dost, za to uz se da skoro sehnat hotovej driver.

Chapu dobre, ze ten driver nepotrebuje zpetnou vazbu od enkoderu?
Mex
Příspěvky: 10288
Registrován: 6. 2. 2014, 10:29

1. 2. 2017, 6:34

misil píše:Chapu dobre, ze ten driver nepotrebuje zpetnou vazbu od enkoderu?
Ne, nechápeš.
Uživatelský avatar
Thomeeque
Příspěvky: 8867
Registrován: 30. 1. 2012, 10:20
Bydliště: Mimo ČR

1. 2. 2017, 7:07

crinq píše:Hi,
we will assemble a batch after testing.

Nico
Hey Nico,

is any of the previous prototypes on active duty on the real machine already?

Cheers, T.
mimooborová naplavenina • kolowratský zázrak™ • NPS • GCU • HirthCalc • ncDP.ino
misil
Příspěvky: 150
Registrován: 25. 2. 2014, 11:00

1. 2. 2017, 7:26

Mex píše:
misil píše:Chapu dobre, ze ten driver nepotrebuje zpetnou vazbu od enkoderu?
Ne, nechápeš.
no, na videu to nevypada ze by kablik z enkoderu na motoru vedl do driveru - ale ok, kouknu na schema :)
Odpovědět

Zpět na „Ostatní elektronika“